| GaugeType | B-A Gauge |
|---|---|
| Pressure Range | |
| Main AC | 100~240V 50/60H |
| Power Consumption | 28W (measurement mode with 5m cable) |
| Filament | Yttria coated Iridium x2 (Auto Switching) |
| Emission current | 42mA 2.5mA |
| Tough Mode | 300ºC | 500ºC | 700ºC | OFF |
| Tough Mode Heating Part | Grid & Collector |
| Degas Mode | Grid & Collector: 900ºC (2min) |
| Operating Temperature | |
| Inputs | Emission ON/OFF Tough Mode ON/OFF Degas ON/OFF |
| Outputs | Analog 0~10V x 2 Setpoint x 2, PhotoMOS relay N.O. Form A Alam x 1, PhotoMOS relay N.O. Form A |
| Dimensions | 1/4 Rack(3U) x 230mm Depth |
| Weight | Controller: 1.2kg |
| I/O Connectors | Dsub15 / USB |
| Flange | KF25, CF40 |
| Communication | RS232C, USB |
| Remarks | Sensor Cable 5m |
B-A Tough Gauge© had been developed based on the patented Tough Mode© technology by Ampere Inc. in Japan.
The Tough Mode© can heat up the grid and the collector while pressure measurement in order to prevent contaminants in process environment from being deposited on the grid and the collector. In conventional B-A Gauge, the deposited contaminants shorten the lifetime of the gauge and cause inaccurate measurement.
The B-A Tough Gauge© will give longer lifetime in the environment where corrosive or organic particles involved and will be able to keep the accuracy of the measurement all through your production cycle.
TG102S is a Byard-Albert ionisation gauge which can measure down to 10-9 mbar (hPa) with Tough Mode©. The external controller is rack mountable.
Part codes
| TG Part Code | TG Part Specifications | TG Part Contents |
|---|---|---|
| TG102S-001 | KF25, Viton seal | Sensor, Controller & Cable 5m |
| TG102S-002 | CF40, Metal gasket | Sensor, Controller & Cable 5m |
| TGH100-001 | KF25, Viton seal | Sensor onnly |
| TGH100-002 | CF40, Metal gasket | Sensor only |
| TGC102S-001 | Connection to a sensor with a cable | Controller only |
| TG102SCBL-005 | 5m | Cable |